SICK, Inc., the North American subsidiary of SICK was established in 1976. The headquarters is located in Minneapolis, MN and there are sales offices throughout the U.S. and Canada. SICK’s goal is to help their clients achieve their goals: high production rates, short processing times, safe environments and consistent high quality. They design and manufacture our cost-effective products to achieve a high level of precision, reliability and versatility.

GAS ANALYZERS

GM32

The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3, as well as TRS components in Kraft pulp processes including pressure and temperature in the gas duct. Direct, fast and without gas sampling and transport. For more information on the GM32, click here.

GM35

Simultaneously or as individual measurements, the GM35 gas analyzer measures CO2, H2O and CO or N2O as well as temperature and pressure quickly, easily and economically. For more information on the GM35, click here.

GM700

High reliability and precision as well as minimal response times are the distinguishing features of the GM700 laser gas analyzer. For more information on the GM700, click here.

GM901

The GM901 gas analyzer is available as a cross-duct or probe type. As a result, it is suited to a broad range of applications – even for difficult measuring tasks such as high dust loads, overpressure, critical flow profiles or high measuring gas concentrations. For more information on the GM901, click here.

GME700

High reliability and precision are the distinguishing features of the GME700 laser gas analyzer. Based on the principle of TDLS (Tunable Diode Laser Spectroscopy) and by using specific light absorption, the GME700 is able to measure several gas components, such as NH3, HF, O2 or HCl. For more information on the GME700, click here.

GMS800

The GMS800 is an innovative product family of extractive analyzers which can measure more than 60 different gas compounds. The GMS800 is characterized by its modular design: 7 analyzing modules, one gas module, I/O modules and an operating unit. For more information on the GMS800, click here.

MCS300P

The MCS300P is an extractive process photometer for measurement of gaseous or liquid media. It measures IR and VIS active components with variable measuring ranges from very low (ppm) to high (vol%) concentrations. For more information on the GMS800, click here.

MERCEM300Z

The MERCEM300Z mercury measuring system monitors Hg emissions in flue gases with high reliability within the smallest measuring ranges. Due to its rugged housing, MERCEM300Z is suitable for use in harsh industrial environments. For more information on the MERCEM300Z, click here.

S700

The S700 modular system offers a configuration specific to the application. The S700 enclosures can be equipped with up to 3 analyzer modules for compact and cost-effective solutions. For more information on the S700, click here.

SIDOR

The SIDOR is a gas analyzer for measurement of up to 2 infrared components. Additionally oxygen can be measured by integration of an electrochemical or paramagnetic measuring cell. For more information on the SIDOR, click here.

TRANSIC100LP

Measuring the oxygen in the process can be quite simple. The TRANSIC100LP from SICK is the rugged transmitter that uses Tunable Diode Laser Spectroscopy (TDLS) to measure O2 reliably. For more information on the TRANSIC100LP, click here.

ZIRKOR302

The ZIRKOR302 in-situ analyzer provides a reliable and rapid measurement of oxygen, also at higher temperatures. Designed in line with current safety standards the analyzer does not represent a potential ignition source in the sample gas. For more information on the ZIRKOR302, click here.

DUST MEASURING

DUSTHUNTER C200

The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles transmittance and scattered light forward. It is ideal for measurement of very low to high dust concentrations. For more information on the DUSTHUNTER C200, click here.

FWE200

The FWE200 dust measuring system is designed to measure dust concentrations in wet flue gas. The gas is extracted via a sampling probe and heated above dew point.For more information on the FWE200, click here.

DUSTHUNTER SB50

The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e.g. in hot or corrosive gases. The measurement is based on the backward scattering of light. For more information on the DUSTHUNTER SB50, click here.

DUSTHUNTER SB100

The DUSTHUNTER SB100 is an approved measuring device for dust at very low to medium concentrations in challenging applications, e.g. in hot or corrosive gases. The measurement is based on the backward scattering of light. For more information on the DUSTHUNTER SB100, click here.

DUSTHUNTER SF100

The DUSTHUNTER SF100 is an approved measuring device for dust at very low to medium concentrations. The measurement is based on the forward scattering of light. For more information on the DUSTHUNTER SF100, click here.

DUSTHUNTER SP100

The DUSTHUNTER SP100 is an approved measuring device with probe for very low to medium dust concentrations. It is ideal for thick-walled or double-walled ducts because of the one-sided installation. For more information on the DUSTHUNTER SP100, click here.

DUSTHUNTER T50

The DUSTHUNTER T50 is an economic measuring device for dust at medium to high concentrations in gases above the dew point. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. For more information on the DUSTHUNTER T50, click here.

DUSTHUNTER T100

The DUSTHUNTER T100 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. For more information on the DUSTHUNTER T100, click here.

 DUSTHUNTER T200

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration.  For more information on the DUSTHUNTER T200, click here.

GAS FLOW

FLOWSIC60

The FLOWSIC60 ultrasonic measuring device uses ultrasonic signals to continuously measure air velocity in tunnels and shafts. The rugged measuring device consists of high-quality stainless steel components and is ideal for use in harsh environments. For more information on the FLOWSIC60, click here.

FLOWSIC300

The FLOWSIC300 ultrasonic flowmeter features a unique combination of high quality components, large measuring range, simple installation and low installation costs. For more information on the FLOWSIC300, click here.

Flow-X

The Flow-X flow computer provides gas volume conversion, event logging, audit trails and reports using latest technology. Each module combines advanced measurement technology, fast digital signal processing, abundant processing power, versatile data communication and high capacity storage into a fully equipped flow computer. For more information on the Flow-X, click here.

TUNNEL SENSORS

Tunnel Sensors

More safety, less congestion – this is the main objective of traffic management in the future. Intelligent traffic monitoring systems will form the basis of modern traffic management technology.  For a complete listing of tunnel sensor models, click here.

ANALYZER SYSTEMS

Analyzer Systems

Our analyzer systems supply application oriented solutions for measuring tasks in emission and process measurement.
Thereby it is differentiated between complete “hot” measuring (MCS100E HW) and a measuring behind a cooling system to remove water vapor (MKAS systems).  For more on the analyzer systems, click here.