L-VEGA-Claim-EN-CMYK

For over 60 years, VEGA Americas, Inc. (formerly Ohmart/VEGA Corporation) has provided industry-leading products for the measurement of level, density, weight, and pressure. The company’s enduring mission is “to deliver innovation measurement solutions worldwide.” A global corporation located in Cincinnati, Ohio, VEGA Americas combines manufacturing, distribution, and service for products that represent the most sophisticated process measurement technologies anywhere in the world.

LEVEL

VEGAPULS-1

VEGAPULS

VEGAPULS products are used for level radar sensing through a variety of conditions such as standard connections, difficult process conditions, sanitary or highly corrosive systems, small process connections, and the measurement of bulk solids. For a complete listing of VEGAPULS models, click here.

VEGAFLEX

VEGAFLEX products are guided wave radar systems that provide continuous level measurements of liquids, solids, or temperatures in a variety of environments. For a complete listing of VEGAFLEX models, click here.
VEGASON-1

VEGASON

VEGASON products are ultrasonic sensors that are used to measure liquids and/or solids. The PVDF transducer has an integral temperature sensor used to compensate for the change in the speed of sound at different temperatures. For a complete listing of VEGASON models, click here.

VEGACAL

VEGACAL products are rod or cable electrodes for solids and conductive/non-conductive liquids. These products are designed for use in virtually all industries. For a complete listing of VEGACAL models, click here.

FIBERTRAC

The FIBERTRAC is a nuclear detector with a flexible scintillator used for level measurement. It is well-suited for a wide variety of liquids, bulk solids, sludge, and suspensions due to its ability to accommodate vessel geometry. For more information on the VEGA FIBERTRAC, click here.

SOLITRAC

The VEGA SOLITRAC is the most sensitive continuous level detector available. This product is intended for use on thick-walled vessels and other applications with very low radiation fields. For more information on the SOLITRAC, click here.

 

LEVEL SWITCHING

VEGACAP

 

VEGACAP products are capacitive rod electrodes or capacitive cable electrodes for detection of solids and non-conductive or conductive liquids. For a complete listing of VEGACAP models, click here.

VEGAKON

 

VEGAKON products are conductive or multi-point level switches used for the detection of conductive liquids in a pipe or tube. For a complete listing of VEGAKON models, click here.

EL

 

The VEGA EL comes in a variety of models that are used as overfill, dry run, or pump control systems. Models are available for use in conductive liquids. For a complete listing of VEGA EL models, click here.

VEGAMIP

 

The VEGAMIP product is a non-contact level switch consisting of a separate microwave emitter and receiver. The VEGAMIP system can also be used for object monitoring. For more information on the VEGAMIP, click here.

VEGASWING

 

The VEGASWING comes in a variety of models that use a vibrating level switch for the detection of liquids. These products range from an economical model to models that are reliable in the toughest environments, which come in either a standard or custom length. For a complete listing of VEGASWING products, click here.

VEGAVIB

 

The VEGAVIB products come in various lengths and use vibration for the detection of solids and powders. They are for use in solids. For a complete listing of VEGAVIB products, click here.

VEGAWAVE

 

The VEGAWAVE products come in a variety of lengths and uses a vibrating fork level switch for the detection of bulk solids and powders. They are for use in solids. For a complete listing of VEGAWAVE products, click here.

POINTRAC

 

The VEGA POINTRAC is a radiation-based sensor for point level detection of liquids and solids. This product is an economical solution providing high sensitivity with minimum radiation activity. For more information on the POINTRAC, click here.

 

PRESSURE

VEGABAR

 

The VEGABAR transmitters reliably report pressure and inferred level measurements in many industries. The transmitters excel in standard gas, vapor, and liquid applications with moderate process conditions, as well as in situations where small process connections exist. For a complete listing of VEGABAR products, click here.

VEGABAR

 

VEGABAR products are used for hydrostatic level measurement. They measure level based on the hydrostatic pressure on the sensor created by the height of the liquid. For a complete listing of VEGABAR products, click here.

VEGAWELL

 

The VEGAWELL is used for the hydrostatic level measurement of liquids in deep wells and basins. It measures level based on the hydrostatic pressure on the ceramic CERTEC measuring cell. For more information on the VEGAWELL, click here.

VEGADIF

 

The VEGADIF is a differential pressure transmitter with an isolating diaphragm, used for liquid level measurement in pressurized vessels and pressure monitoring on filters and pumps. For more information on the VEGADIF, click here.

 

 

DENSITY

MINITRAC

 

MINITRAC products use a sensitive nuclear detector for density and point level measurement. The MINITRAC 31 is for use in Refining, Mining, Chemical, Food, Soaps and Detergents, and Pulp and Paper industries. The MINITRAC 32 is for use with slurries, solutions, and other fluid processes in the Refining, Mining, Chemical, and Pulp and Paper Industries. For a complete listing of MINITRAC models, click here.

 

 

SYSTEM COMPONENTS

VEGAPULS-1

VEGACONNECT

 

The VEGACONNECT provides an interface converter between the USB port of a PC and HART or 12C interface of VEGA instruments. VEGACONNECT is a system component used for indicating and adjustment. For more on the VEGACONNECT, click here.

PLICSCOM

 

The PLICSCOM module is used to configure and provide measured value indication for any VEGA PLCIS sensor. They are suitable for VEGAFLEX 60, VEGABAR 50/60, VEGAPULS 60, VEGACAL 60, and VEGASON 60. For more information on the PLICSCOM, click here.
VEGASON-1

VEGADIS

 

The VEGADIS products function as indication/display instruments. Each model offers unique functionality and features for its intended use. For a complete listing of VEGADIS models, click here.

VEGAMET

 

The VEGAMET products come in a variety of models that provide signal conditioning and power supply for continuous measurement. For a complete listing of VEGAMET models, click here.

VEGASCAN

 

The VEGASCAN is a data scanning device for connection to 15 HART sensors. The output is either RS-232 to Visual VEGA display software or Ethernet. For more information on the VEGASCAN, click here.

VEGATOR

 

The VEGATOR products provide single signal conditioning for processing signals with continuous measurement systems. Each model features adjustable integration time. For a complete listing of VEGATOR models, click here.